Techno Coatings is an industry leader in protective coatings and linings with the unique capabilities of providing turnkey shop and field production.

As a proven and trusted applicator serving the energy sector, oil, gas, petrochemical, military/department of defense and commercial & manufacturing industries. Techno Coatings proudly services the needs of a facility or project, large or small. With a broad focus on architectural and industrial, high performance coatings application and a skill set of shop and field installation of a multitude of applications, Techno Coatings also applies industrial coatings for bridges, tanks/vessels, structural steel, marine pilings (sheet, pipe, and beams), equipment, and chemical resistant coatings/linings for environmental containment solutions.

An AMPP (SSPC) QP-1, 2, 3 and QS-1 Certified shop, abrasive blasting and coating facility

  • A certified, small business (micro) by California Department of General Services (SBE #202291)

5-1/2 acres of laydown area, with 50,000 SF under roof

(2) abrasive blast booths (20’W x 20’H x 83’L and 12’W x 12’H x 28’L)

(5) forklifts, with a combined lifting capacity of 97,000 lbs.

§  (Hopefully (6) forklifts, with a combined lifting capacity of 150,000 lbs.)

(2) 1.5 million BTU indirect heaters

Chris Radovich

AMPP Senior Certified Coating Inspector, Level III #28721

Tyler Tungate

AMPP Certified Coating Inspector, Level I #106536

TruQc, web-based, mobile platform for quality control documentation. QC reports can be provided to customers upon request, at no additional cost.

Exterior Exposure:
Zinc-rich primers, polyamide epoxy, aliphatic polyurethane and other liquid, air-dry products.

Interior Exposure:
high-solids and 100% solids epoxies and polyurethanes.

Plural-component spray equipment and coatings.
*No fusion bonded epoxies (FBE), cement mortar lining/coating or baked/forced cured.

Internal – 20” OD and greater. All liquid-based coating, that do not require “baked cure”.

External – virtually no limit (18’ OD and below and up to 150’ in length)

  1. Mid-Coast Corridor Project: Public transit project in San Diego; shop coated station structures at (9) Stations from platform canopies and guard railings to elevator towers and stair structures with a full 3-coat system, with full-time 3rd party inspection.
  2. Northrop-Grumman: (4) Vessels (144” OD x 59’ L) – JP5 – Interior & Exterior Coated (3-coats, each)
  3. Tinker AFB: (4) Vessels (96” OD x 32’ L) – JP5 – Interior & Exterior Coated (3-coats, each)
    Gerald Desmond Bridge Replacement: Bridge Girders and Misc. Support Structures (2-coat system: zinc-rich primer and polysiloxane topcoat) – Caltrans & 3rd Party Inspection throughout.
  4. North Dakota Access Project – exterior coating of approx. 4,000LF of CS piping. (3-coat epoxy system)
  5. Riverside Reginal WQCP – 24” OD to 96” OD carbon steel piping
    Interior surfaces – 100% solids epoxy (Enviroline 230)
    Exterior surfaces – polyamide epoxy (Tnemec Series N69)
    P66 – H2S Absorber – 6’ OD x 60’ Tower
    Interior Surfaces – SP5 and 30-40 mils of Carboline’s Plasite 4550-S.
    Exterior Surfaces – SP10 and Carboline’s Carbozinc 11HS, Carboguard 890VOC and Carbothane 134MC, per manufactures recommendations, in Safety Yellow.
Verified by MonsterInsights